Email providers such as Gmail, Outlook, and Yahoo judge the reputation of the domain in your From address. A new domain, a domain you haven't used in a while, or a sudden increase in sending volume can look suspicious to providers and cause your emails to land in spam or be blocked.
To avoid this, you can use domain warm-up when scheduling a campaign. You start with a small volume and increase it progressively, so providers learn that your domain is legitimate.
Good to know
- Domain warm-up is only available if you send through Brevo's shared IPs. Shared IPs are already warmed up, so you only need to warm up your domain.
- If you use a dedicated IP, you need to warm up your IP instead. To learn more, check our dedicated article Warm up your dedicated IP (automatic warm-up).
When should I warm up my domain?
We recommend warming up your domain by sending progressively after you add a new domain, and for your first two campaigns of more than 2,000 recipients. It is also useful when:
- You changed your domain configuration.
- You haven't sent emails from your domain in a while.
- You plan to suddenly send many more emails than usual, for example when going from a small audience to a large one.
- You want to rebuild your reputation after a block, a compromised account, or domain spoofing.
If your domain is well established and your sending volume is steady, you don't need a warm-up.
Warm up your domain
To send a campaign progressively and warm up your domain:
- At the Schedule step of your email campaign, select New domain? Send gradually to protect your sender reputation.
- In Initial number of emails, enter the number of emails to send in the first hour. We recommend 200.
- In Percentage of increase per hour, select 1% to increase the amount every hour, or 0% to send the same amount every hour. We recommend 1%.
- Check the message that shows how long your campaign will take to send.
- Send or schedule your campaign.
How domain warm-up works
Domain warm-up applies to the campaign you schedule, not to all the campaigns sent from your domain. When you send a campaign progressively, Brevo sends it in steps, one step every hour, until all your recipients have received it:
- In the first hour, Brevo sends the initial amount of emails you choose.
- In each following hour, Brevo sends the amount of the previous hour plus the percentage of increase you choose.
- The interval between two sends is always 1 hour. You can't change it.
You can choose between two increases:
- 0%: Brevo sends the same amount of emails every hour.
- 1%: the amount grows by 1% every hour, which adds up to about 27% more over 24 hours.
How long will my campaign take to send?
The following table shows how long a campaign takes to send with an initial amount of 200 emails, depending on the number of recipients and the percentage of increase per hour.
| Number of recipients | 0% increase per hour | 1% increase per hour |
|---|---|---|
| 1,000 | 5 hours | 5 hours |
| 5,000 | 1 day and 1 hour | 23 hours |
| 10,000 | 2 days and 2 hours | 1 day and 17 hours |
| 50,000 | 10 days and 10 hours | 5 days and 6 hours |
| 100,000 | 20 days and 20 hours | 7 days and 13 hours |
| 500,000 | 104 days and 4 hours | 13 days and 16 hours |
Best practices
- Start with your most engaged contacts. Target contacts who opened or clicked your emails recently, and gradually reach out to less active contacts. To learn more, check our dedicated article Create a segment to filter your contacts.
- Authenticate your domain. A warm-up doesn't fix missing authentication. To learn more, check our dedicated article Authenticate your domain with Brevo (Brevo code, DKIM, DMARC).
- Use a clean contact list and avoid spammy content. Warming up with a poor list only damages your domain more slowly. To learn more, check our dedicated article Best practices for email deliverability.
❓ FAQs
To learn more about domain warm-up, expand the following accordions:
Brevo doesn't show when a domain is warmed up. It depends on each email provider, so follow our recommendation and keep an eye on your campaign results.
No. You can only choose 0% or 1% for the percentage of increase per hour, and the interval between two sends is always 1 hour.
No. If you need to stop the sending, cancel the campaign.
Sending a large volume right away from a new domain, from a domain you haven't used in a while, or after a sudden increase in volume can raise red flags with email providers. Your emails can be marked as spam or blocked, and in the worst case your account can be suspended.
⏭️ What's next?
- Differences between a shared IP and a dedicated IP
- Best practices for email deliverability
- Authenticate your domain with Brevo (Brevo code, DKIM, DMARC)
🤔 Sie haben eine Frage?
Wenden Sie sich bei Fragen an unser Support-Team: Erstellen Sie einfach ein Ticket über Ihr Konto. Wenn Sie noch kein Konto haben, können Sie uns hier kontaktieren.
Wenn Sie Unterstützung bei einem Projekt mit Brevo suchen, können wir Sie mit der richtigen zertifizierten Brevo-Partneragentur verbinden.